I’ve been a busy little bee, sewing up a moulage for myself. And it worked!

Longtime readers may recall that ages ago, frustrated with sizing in commercial sewing patterns, I had applied the principles of knitting to sewing — draft a Back and do an FBA to get the Front. This actually worked surprisingly well, and I used this pattern to make quite a few pretty things.

But it was never quite right. Woven fabric behaves differently from hand knits, and there was always a little gaping here, a couple of diagonal drag lines there, some falling shoulder seams too, meaning the garments looked nice, but not stellar like some of my best hand knits (yes, modesty isn’t really my thing).

So finally I took a class on Craftsy, The Bodice Sloper, to draft my own sloper. People, it is a fabulous class, well worth the full price (and even better if you get it at a super discount like I did). The instructor, Suzy Furrer is very clear, articulate and competent, and the lessons are full of little nuggets of information: did you know, the front neck is 1/8 inches larger than the back to prevent gaping and pulling? And that if you’re over a C cup you should fold out half your armscye dart in a sleeved garment to have ease for sleeves and yet create additional cupping? That there is even a horizontal dart-like ‘waist shaping’ which needs to be dealt with to avoid wrinkling in the torso? That there are actually two points on the front, from which darts can radiate? I certainly didn’t, and I am so grateful I took this class.

You start off by measuring yourself and drafting a moulage which is a skin tight mould of the body in woven fabric. The theory is that once you draft a perfect moulage, you can then add ease to it to create a sloper, which is a basic template of a garment. So why not start with a sloper? Because the ease built into it will not allow you to correct fit problems. But by starting with a body mould (the moulage), you know that whatever slopers you create off it (with small positive ease for blouses, greater positive ease for jackets and coats, negative ease for knits) will fit exactly as intended.

I admit to having my reservations — I wondered if I should measure my front and back circumferences separately. But I followed instructions exactly, and yeah it all worked out! The only place where I went off script was to follow the instructor’s answer in reply to a question from a body type similar to mine. It was a minor adjustment to the side seam length, but it was necessary to get a good curve at the armhole.

Once my moulage was perfect (only took two tries, and the process was quick and exasperation-free), I drafted up a blouse sloper. What freedom that no further fitting was needed!

Here’s the Creature critically inspecting the moulage…

20160719_131814

I’ve already made a couple of blouses from the sloper, one sleeveless and the other with sleeves (which requires a further, small modification to the sloper), and will be posting about them soon.

Now, finally, I’m going to reanimate my plans for a Cambie and Parfait. I had dreaded the amount of adjustments required, but now I can just copy the style lines and draft to exactly my own shape!

 

Breaking the Mould

8 thoughts on “Breaking the Mould

  • 9 October 2016 at 8:43
    Permalink

    Great post! I’ve bought this and the skirt slower lessons. Just needed some motivation to get on with it and you might just have given me it! 😀

    Reply
  • 9 October 2016 at 8:43
    Permalink

    Great post! I’ve bought this and the skirt slower lessons. Just needed some motivation to get on with it and you might just have given me it! 😀

    Reply
  • 16 October 2016 at 3:57
    Permalink

    Beautiful! And I am envious. I live in a rural area and a single craftsy class would blow our data cap badly, even if I watched it only a little at a time. I bought Kenneth King’s book on making a moulage. You have inspired me to get on that project soon!

    Reply
    • 17 October 2016 at 10:35
      Permalink

      Thanks! Craftsy used to be very slow for me, until I switched over to the SD version (as opposed to HD). Also, using Chrome as the browser to access Craftsy speeds things up too.

      Reply
  • 16 October 2016 at 3:57
    Permalink

    Beautiful! And I am envious. I live in a rural area and a single craftsy class would blow our data cap badly, even if I watched it only a little at a time. I bought Kenneth King’s book on making a moulage. You have inspired me to get on that project soon!

    Reply
    • 17 October 2016 at 10:35
      Permalink

      Thanks! Craftsy used to be very slow for me, until I switched over to the SD version (as opposed to HD). Also, using Chrome as the browser to access Craftsy speeds things up too.

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

%d bloggers like this: